POLY BLACKWIRE C5220 Kopfhörer, 3,5-mm-Klinke, USB-C, Stereo (2023)

FAQs

Is Plantronics Blackwire noise Cancelling? ›

With the Blackwire 8225, your voice is the only thing heard, not the chaos around you. Its noise-canceling microphone with Acoustic Fence technology puts you in a quiet office, even if you're in a noisy kitchen.

The Blackwire 3200 Series offers PC wideband, noise-canceling microphone and hi-fi stereo sound options.

Activate Bluetooth on your phone and search for new devices, the name of the Plantronics Bluetooth headset will appear as “PLT” followed by the model name. Start with your headset powered OFF, slide and hold the power toggle towards the Bluetooth icon until you hear "pairing" and/or the LED flashes red and blue.

The light on the headset will flash red while charging and turn blue when fully charged. To charge the headset, simply plug the USB charger into a USB port on a powered computer.

It takes approximately 2 hours to fully charge your headset. While your headset is charging the indicator glows red. When your headset is fully charged, the indicator turns off.

Soft, conforming ear cushions provide passive noise canceling while its precisely tuned microphone masks nearby conversations.

You will find the volume controls on the bottom of the base, or behind a compartment on the side of the base. To change the volume of your product rotate the wheel or move the switch on the listening volume and speaking volume until you get to the desired volume level.

Prevent poor listening hygiene

Noise cancelling headphones are really good at getting rid of droning sounds like computer fans, and engines. If you crank your tunes up to drown out the world around you, it's possible you're deafening yourself slowly.

The Bose QuietComfort 35 II is one of the best active noise canceling headsets. The companion app lets you manually adjust the ANC and other sound settings, and the slim design makes it comfortable to wear for hours.

3200 Series Blackwire at Rs 5499.00 in New Delhi | ID: 26434743591.

Is Plantronics C3220 noise cancelling? ›

Plantronics Blackwire C3220 Wired Over-the-head Stereo Headset - Supra-aural - 20 Hz to 20 kHz - Noise Cancelling, Noise Reduction Microphone - USB Type A overview. The Blackwire 3200 Series corded UC headsets are durable, lightweight, easy to deploy and come in a variety of connectivity and wearing options.

Plantronics and Polycom are now together as Poly. Partner of choice for the communications and collaboration ecosystem.

If callers can't hear you, try the following:

Check that the mute option is not on. Ensure that the headset microphone boom is positioned properly. Try other telephone configuration dial settings on the left side of the base unit.

If you are experiencing issues using your USB headset, try the following: Unplug the headset from the PC's USB port and reboot the computer. Do not just restart - perform a complete system shutdown and then turn back on, as this will help clear the memory in the USB ports.

Make sure you have the appropriate drivers for your internal Bluetooth adapter. Many times, these drivers are not installed by default - even on new computer installations. Therefore, you will need to download the drivers from your computer manufacturer in order for you to use your Bluetooth headset as an audio device.

Step 1: Press the Talk Button and push the Mute Button in for 5 seconds until the Talk Indicator Light begins to flash green. Release both buttons. Step 2: Press the Talk Button again and release. Step 3: The last step is to unplug the AC power adapter for 5 seconds, then reconnect.

If possible, remove the battery from the phone. Power the cell phone on again. Pair the headset with your phone again. If the issue persists, try Pairing the headset to a different cell phone.

Turn the headset on. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the button and set the headset aside. On your cell phone, go to the Bluetooth menu and search for (or add) a device.

Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it. Put your headset in pair mode. Put your Bluetooth USB adapter into pair mode by selecting "Pair" in Poly Lens App. Your adapter flashes red and blue.

How do I check the battery level on my Plantronics headset? ›

Blinking slowly - The headset is active and ready to use. Blinking very rapidly - The headset is not linked to the base station at all. This will occur when ever the base station does not have power. If it happens when the base station does have power please reset the headset as per the link above.

If your headset will not charge, then the golden headset connectors may be too dirty. Sometimes, dirt piles up on the headset preventing the flow of electric current to the battery. This can easily be fixed by using a cotton swab to thoroughly remove the dirt off of the connectors.

You can add a voice prompt notification by managing your mute features with Plantronics Hub for Windows and Mac. While not on a call, tap the red Mute button to activate OpenMic and hear your surroundings. Control the level of ambient noise you hear by adjusting the volume wheel.

Your headset is in pairing mode. If you are not trying to pair the headset, reset it by simply turning the headset off and then back on again.

Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware.

The headset Status Indicator will also flash red when the battery needs to be recharged. You should charge the headset immediately. All of these wireless headsets use rechargeable lithium ion batteries that last for up to 500 full charging cycles.

Go to Control Panel > Sound and Audio Devices, and in the Audio tab set the Plantronics 725 device for the Sound Playback. Place a call using your softphone software. Active Noise Cancelling (ANC) reduces unwanted noise. Slide the switch towards ANC to activate.

Noise cancelling headphones monitor the sound around you, preventing the unwanted noise from ever reaching your ears. Miniature microphones in the earcups or earbuds listen to the outside noise frequencies and emit the exact opposite signal to effectively “cancel out” both sets of sounds when the soundwaves collide.

You can set the range to high, medium, or low. You can change this setting directly from the USB adapter or via the Plantronics software. To change the range from the USB adapter: Turn off the headset if it has an active link.

How do I adjust the volume on my Plantronics? ›

Fine-tune your headset listening volume by pressing the volume/mute button up (increase) or down (decrease) if you wear your headset on the right. If you wear it on the left, it's opposite: press down to increase the volume and up to decrease the volume.

We already established that headphones don't cause tinnitus, unless you turn up the volume too much. The same is true for active noise cancelling (ANC) headphones; the technology as such doesn't cause tinnitus.

Because they fill your ears so well, they block most of the sound of voices. A less expensive alternative is “universal fit” earphones that route their cables back over your ears instead of downward, such as the $99 Shure Aonic 215 and the $249 Sennheiser IE 300.

Noise-Cancelling speakers help you, the users of a headset, hear better in loud environments and avoid background noise and distractions.

Applying high-pass filters and low-pass filters to certain audio tracks can reduce many of the ambient sounds that turn up as background noise. A high-pass filter allows high frequencies to pass through, but filters out frequencies below a certain threshold (which you set in your DAW software).

For speech blocking, active noise cancelling headphones rely mostly on passive sound isolation, not on their electronics. With current top-of-the-line noise cancelling headphones, you can expect between 15 and 25 dB noise reduction from 500 to 2000 Hz, which is substantial but not nearly enough to eliminate speech.

Poly Blackwire 8225 UC Stereo Headset:

The noise canceling microphone with it's Acoustic Fence technology places you in a quiet office, even if you are not. In addition to the audio, the Hybrid active noise cancelling (ANC) helps tune out background noise.

This Blackwire 7225 is a corded, boomless stereo (2 ear) USB only headset. It is black and has Active Noise Cancelling in the earcups. So is this headset right for you?

With the Blackwire 8225, your voice is the only thing heard, not the chaos around you. Its noise-canceling microphone with Acoustic Fence technology puts you in a quiet office, even if you're in a noisy kitchen.

Which Bluetooth earphone has best noise cancellation? ›

The headset battery may need to be charged. The USB Bluetooth adaptor may not be set as the default audio device. Use the audio settings in Windows under Sounds and Audio Devices to select "Plantronics BT Adaptor" as the audio device. The listening volume may be too low.

If callers can't hear you, try the following:

Check that the mute option is not on. Ensure that the headset microphone boom is positioned properly. Try other telephone configuration dial settings on the left side of the base unit.

If you're using a Jabra, Plantronics or Sennheiser headset you may have integrated call controls, which allow you to answer, hang up or mute calls using the buttons on the headset itself. By default, this feature is disabled on Work for Desktop, so you'll need to take a few steps to turn it on.

You simply press the “Headset” button (or the “speaker” button) or the ringing line button to answer a call and press the “Headset” button to hang up a call. Amplifiers have speaker volume and microphone volume, compatibility settings for your specific phone, and a mute button.

You can add a voice prompt notification by managing your mute features with Plantronics Hub for Windows and Mac. While not on a call, tap the red Mute button to activate OpenMic and hear your surroundings. Control the level of ambient noise you hear by adjusting the volume wheel.

Make sure the USB connection is not loose. If the USB connection is secure, but the issue persists, try connecting to a different USB port. Wait for your computer to recognize the USB connection, and then test the microphone again. Make sure that your Plantronics headset is selected as the default audio device.

Open the Settings app. Navigate to the System setting and click on Sound in the left sidebar. Next, click on Manage sound devices under the Troubleshoot button in the Input devices settings. Scroll down, locate your device under the Disabled section, and enable your microphone by clicking Enable.

Make sure apps have access to the microphone

If your microphone isn't detected after updating Windows 10, you may need to give your apps permission to use it. To let apps access the microphone, select Start ,then select Settings > Privacy > Microphone . Select Change, then turn on Allow apps to access your microphone.

How do I test my Plantronics headset and mic? ›

Double-click the Sound icon. Make sure the Plantronics Headset is set as the Default device under the Playback and Recording tabs. Under the Recording tab view the meter to the right of the headset listing as you speak into the microphone. If this meter goes up and down as you speak then the microphone is operational.

You can mute and unmute your headset using Plantronics Hub. To mute or unmute your headset, click the headset icon in the System Tray. To mute the device, click Mute. The headset icon turns red to indicate the device is muted.